Installation Instruction

PARTY HIRE

Party Marquee Installation Instruction

Please Note: All marquee products that are picked up and dropped back to the warehouse by the principal client takes full responsibility of returning the product in the same order it left in. This being: All marquee material folded, All marquee material to be clean & dry, Poles in order & tied up with bungee rope, All accessories & weights returned.
Description
Set Up

Part 1
Lay out the frame of the roof according to the diagram.

Assemble the roof of the marquee.
Start by connecting the number 2 middle poles of the roof to the A and B joints.

Then connect the number 2 outer poles of the roof frame with A and B joints.
Connect the outer and middle frame with number 1 poles to the A and B joints.

 (Connect the outer and middle frame with number 1 and 4 poles to the A and B joints)

(Secure the cross sections of the roof by connecting number 6 poles to the number 1 poles)

Place the marquee roof fabric over the roof frame.
Secure with bungee cords onto the number 2 outer roof poles.

Part 2
Lay out the sidewall frame of the marquee according to the diagram.
(Number 3 poles).

Connect number 3 poles to the roof frame joints, one side at a time.
Lift one side up at a time. Secure the number 3 side poles to the base feet. Ensure the number 3 poles are locked into the base feet.

Part 3
Lay out the frame of the base according to the diagram.

Connect the number 7, 8 and 9 poles to the feet of the base frame, on the front and back of the marquee.

Connect number 2 poles between the feet of the base frame on the sides of the marquee. Ensure th poles are locked into the base feet. Use two butterfly screws to secure the poles to the feet.

Secure the feet to the ground. On grass, use the metal pegs provided. On concrete, use the weights provided.

Secure the marquee sidewall fabric to the sidewall frame with bungee cords.

Secure the marquee door fabric to the front and back frames with bungee cords
Make an enquiry about Wedding Marquees